Gallery

Our Machines & Facility

The 1000 Ton Van Dorn is shown here.
Overhead cranes and trolleys are shown here.
Plastic Molding Development in Sterling Heights has state-of-the-art plastic mold testing machines, such as this 1700 Ton Wittmann Battenfeld.
The 350 Ton Wittmann Battenfeld injection molding machine in Sterling Heights, Michigan at Plastic Molding Development Company is shown here.
The 1000 Ton Van Dorn is shown here.
The 350 Ton Wittmann Battenfeld for injection molding in Sterling Heights, Michigan is shown here.
The 350 Ton Wittmann Battenfeld has a 34.6-ounce barrel and Smartpower hydraulic clamp.
The control panel of the 350 Ton Wittmann Battenfeld in Sterling Heights, Michigan at Plastic Molding Development Company is shown here in a closeup.
Several forklifts line the floor at Plastic Molding Development Company in Sterling Heights, Michigan.
The rear end of the 450XL Wittmann Battenfeld barrel is shown here.
Located in Macomb County, Plastic Molding Development offers a friendly atmosphere in a clean workspace. Our 3300 Ton Van Dorn is shown here with the 1700 Ton Wittmann Battenfeld in the background.
Automotive clients come from around the world to use the machines and equipment. A row of forklifts is shown here.
Van Dorn and Wittmann Battenfeld machines of various sizes are available.
This image shows our 500 Ton Van Dorn on the left, 450 XL Wittmann Battenfeld in the middle, and 350 Ton Wittmann Battenfeld on the right.
A clean, spacious lounge is available for PMD customers.
A clean, spacious lounge is available for PMD customers.
This is an artistic, closeup image of black plastic resin pellets.
Several of the machines at PMD are automated, as shown in this closeup image.
This is an image of four forklifts inside the PMD building.
This is a closeup image of steel tool wiring.
This is a closeup image of wiring on a machine.
The dehumidifying dryer on the 1700 Ton Wittmann Battenfeld is shown here.
The 1700 Ton Wittmann Battenfeld features a 5-Axis Cartesian Robot and Hydraulic Clamp 2 Platten.
An artistic image of tools is shown here.
An artistic image of an overhead chain is shown here.
This is a closeup image of the tie bar on the 3300 Ton Van Dorn.
An overhead crane is shown here.
The 770 XL Wittmann Battenfeld at Plastic Molding Development in Sterling Heights, Michigan is shown here.
This is a closeup, decorative image of tools used at Plastic Molding Development Company in Sterling Heights, Michigan.
A closeup of the nozzle on the 350 Ton Wittmann Battenfeld at PMD in Sterling Heights is shown here.
This image shows the control panel of the 450XL Wittmann Battenfeld
This image shows the barrel of the 350 Ton Wittmann Battenfeld.
The 350 Ton Wittmann Battenfeld is available for use at PMD in Sterling Heights, Michigan.
This image shows the control panel of the 350 Ton Wittmann Battenfeld.
Shown here is the back of the 770 Ton Wittmann Battenfeld in Sterling Heights, Michigan at Plastic Molding Development Company.
The 770XL Wittmann Battenfeld is show in this picture.
The cranes and chains are regularly inspected.
The back platten of the 3300 Ton Van Dorn at Plastic Molding Development in Sterling Heights, Michigan is shown here.
Shown here is the barrel of the 1700 Ton Wittmann Battenfeld with 5-Axis Cartesian Robot with Hydraulic Clamp 2 Platten.
The control panel and dryer of the 1700 Wittmann Battenfeld machine is shown here.
Shown here is the front platten of the 770 Ton Wittmann Battenfeld in Michigan's Plastic Molding Development facility.
The 1700 Ton Wittmann Battenfeld features a 5-Axis Cartesian Robot.
A crane at PMD
Cranes and machines at PMD
PMD is located in a 35,000 square foot building in Macomb County.
This image shows the control panel and back and front platten of the 1700 Ton Wittman Battenfield in Sterling Heights, Michigan at Plastic Molding Development.
Barrel and dryer of the 1700 Ton Wittmann Battenfeld
Plastic Molding Development's 1700 Ton Wittmann Battenfeld is shown here.
The Kuka robot on the 3300 Ton Van Dorn is shown here.
The 3300 Ton Van Dorn in Sterling Heights at Plastic Molding Development is shown here.
The 770XL Wittmann Battenfeld in Sterling Heights, Michigan at Plastic Molding Development Company is shown here.
The 3300 Ton Van Dorn in Sterling Heights at Plastic Molding Development is shown here.
Shown here is the 700XL Wittmann Battenfeld.
The back of the 450XL Wittmann Battenfeld is shown here.
The 4-axis Cartesian robot on the 500 Ton, 450XL Wittmann Battenfeld in Sterling Heights at Plastic Molding Development Company is shown here.
The 450XL Wittmann Battenfeld has a mold height of more 35 1/4 inches.
This image shows the 4-axis robot on the top of the 450XL machine.
The wiring at the back of the 350 Ton Wittmann Battenfeld barrel is shown here.
The 450XL Wittmann Battenfeld features a modern control panel. The front platten of the machine is also shown.
The 350 Ton Wittmann Battenfeld has a maximum press open of 49 1/8 inches.
The magnetic component on a hopper is shown here.
Plastic Molding Development in Sterling Heights serves mold makers in the automotive industry around the world.
PMD is located on Yearego Drive in Sterling Heights in Macomb County, Michigan. This is a photo of the marquee outside of the building on a snow-filled ground.
PMD is located in Sterling Heights in Macomb County, Michigan.
PMD is located on Yearego Drive in Macomb County, Michigan. This is a photo of an exterior marquee on a snow-covered ground.
The PMD logo is emblazoned on a wall inside the building in Sterling Heights, Michigan.
Plastic Molding Development in Sterling Heights features a clean, welcoming office area.

Contact Us

(586) 739-4500

Location

42400 Yearego Dr
Sterling Heights, MI 48314

Email

info@plasticmoldingdevelopment.com

Hours

Mon: 7am - 5pm
Tue: 7am - 5pm
Wed: 7am - 5pm
Thur: 7am - 5pm
Fri: 7am - 5pm
Sat: By appointment
Sun: By appointment

EXPERIENCED PROCESS TECHNICIAN

Weโ€™re looking for someone who will be responsible for all aspects of the injection molding process.

Do you fit the mold?