• =
    Contact Us
  • 586-739-4500
U

3300 Ton Van Dorn Caliber With Robot

Hydraulic Clamp 2 Platten

what it
offers

Our Most Massive Machine

There are not many machines out there that rival the 3300 Ton Van Dorn’s power capabilities. Our largest machine and one of the most desirable, this powerhouse provides the automotive industry with greater options for molding needs.

The 3300 Ton Van Dorn, shown here, is the largest injection molding machine at PMD in Sterling Heights, Michigan.
The 3300 Ton Van Dorn in Sterling Heights at Plastic Molding Development is shown here.
Shown here is the KUKA robot at the top of the 3300 ton Van Dorn at Plastic Molding Development, located near Detroit, Michigan.
The back platten of the 3300 Ton Van Dorn at Plastic Molding Development in Sterling Heights, Michigan.
45
  • 600-Ounce Barrel
  • 6 Core Pulls
  • Retractable Tie Bar
  • Minimum Mold Height – 33”
  • Maximum Mold Height – 112 6/10”
  • Maximum Press Open – 145 3/10”
  • Intensification Ratio – 11.50:1 / Screw Diameter – 6.5”
  • 7-Axis Kuka Articulated Robot
The 3300 Ton Van Dorn Caliber with Robot and Hydraulic Clamp 2 Platten is Plastic Molding Development's largest machine. It has a 7-Axis Kuka Articulated Robot.

Tie Bar Spacing & Additional Highlights

Our largest machine is the 3300 Ton Van Dorn Caliber with a KUKA articulated robot (7-axis). It features six core pulls and a press open of more than 145 inches. Its ejector pattern is as follows:

  • 28” x 6” / 32” x 8”
  • 40” x 10” / 52” x 16”
  • 64” x 16” (HDR. & VER.)
  • 76” x 16” / 72” x 28”
  • 84” x 28” (HDR. & VER.)

Open Press Times Available

Fast turnaround for custom plastic molding development.

Reserve your run before schedules fill up.